Description
S200 Standard Resin
Standard Resin is a cost-effective resin material developed by eSUN for common consumption scenarios.S200 Standard Resin is easy to print and can form thin supports. The small details of the model are clearly presented.
| 3D PRINTING PHOTOPOLYMER RESIN Properties Table | |
|---|---|
| 3D PRINTING PHOTOPOLYMER RESIN | S200 Standard Resin |
| Viscosity(mPa·s) | 182-252 |
| Density(g/cm3) | 1.107-1.109 |
| Tensile Strength(MPa) | 36-64 |
| Elongation at Break(%) | 16-32 |
| Flexural Strength(MPa) | 27-70 |
| Impact Strength(J/m) | 25-55 |
| Tearing Strength(GPa) | / |
| Heat Distortion Temp(℃) | / |
| Hardness(Shore D) | 83-86 |
| Grades (out of 10) | |
| Strength（S） | 8 |
| Toughness（F） | 7 |
| Forming（P） | 9 |
| Accuracy（S） | 8 |
| Speed （A） | 9 |
Notes:
Shake well before printing
