Description
PA100 Nylon-Like Resin
Nylon-like resin is a high-strength resin material invented by eSUN for engineering and manufacturing applications.
| 3D PRINTING PHOTOPOLYMER RESIN Properties Table( *Recommended Settings For Printer can be viewed by visiting “Download”) | |
|---|---|
| 3D PRINTING PHOTOPOLYMER RESIN | PA100 Nylon-Like Resin |
| Viscosity(mPa·s) | 500 |
| Density(g/cm3) | 1.05-1.15 |
| Tensile Strength(MPa) | 68 |
| Elongation at Break(%) | 15 |
| Flexural Strength(MPa) | 35 |
| Impact Strength(J/m) | 20 |
| Tearing Strength(GPa) | / |
| Heat Distortion Temp(℃) | / |
| Hardness(Shore D) | 75 |
| Grades (out of 10) | |
| Strength（S） | |
| Toughness（F） | |
| Forming（P） | |
| Accuracy（S） | |
| Speed （A） | |
Notes:
Shake well before printing
